hen it comes to industrial setting, a high volume of energy is consumed. Keeping lights on 24/7 is a key aspect of such facilities and it comprises a major part of your factory’s operational cost. With the arrival of commercial LED lighting in India, the scenario has completely changed. It has replaced the conventional lighting fixtures. As of now, there are no better energy efficient lighting solutions for the commercial setting. LEDs are changing the landscape and are available in all of the most commonly used fixtures in commercial buildings.

Commercial LED Lighting in Kolkata

Let’s take a look at how to use industrial Led fixtures to reap maximum benefits.

Reduced energy consumption: LED lights for commercial application saves a lot of energy consumption. With conventional fixtures, your energy bill is much higher than it needs to be. LED industrial lighting, on the contrary uses semiconductors to emit light, through which light is emitted. Moreover, LEDs offer exceptional quality of illumination. On the other hand, conventional lighting is unidirectional, which means it emits light 360 degrees. Needless to say, a lot of energy is wasted due to unusable light emissions.

Commercial LED Lighting

Lower maintenance costs: Industrial LED lights are the ideal solution for a commercial setting. As it helps in lowering maintenance costs, factory owners and businessmen are replacing conventional fixtures with LEDs. The upfront costs of completing an LED retrofit might strike high, but it can save the investment for frequent replacement. Some industrial LED lighting bulbs perform 10 times better than the conventional lighting solutions, which results in big-time savings on replacement costs. Replace all the bulbs of your facility or parking lot, and you can see what a difference it would make if no bulbs is needed to be replaced for, say, 15 years. Additionally, switching from gas-discharge lamps to LED technology will help eliminate waste disposal issues.

Industrial LED Lighting

Higher quality lighting: Industrial LED lights have an advantage over most other conventional fixtures if measured with Color Rendering Index (CRI) and Correlated Color Temperature (CCT). CRI is determined as a measurement of a light’s ability to reveal the actual color of objects as compared to an ideal light source (natural light). CCT is essentially the standard to measure the “glow” given off by a bulb. Through CCT, it’s measured whether the bulb is warm (reddish), or cold (bluish white). In case of LED lights, both of these indexes are way higher.

Considering a commercial LED lighting solution can be somewhat intimidating, but considering the long term benefits these are certainly a wise investment.